Product description
Main Applications Metal Matrix Composites:
(1) Abrasive and abrasive industries: TiC abrasives are ideal materials to replace traditional abrasives such as alumina, silicon carbide, boron carbide and chromium oxide. Nano-titanium carbide has the same grinding ability as synthetic diamond, which greatly reduces the cost. It has been widely used in the United States, Japan, Russia and other countries. Abrasives, grinding wheels and abrasive pastes made of nano-titanium carbide materials can greatly improve grinding efficiency, grinding accuracy and surface finish.
(2) Electro-contact plate coating materials: At present, the annual amount of silver used for contact materials in the world accounts for one fourth of the total amount. Adding appropriate amount of nano-TiC into silver plating material can reduce the amount of silver by 5%, save cost and make the performance of composite coating more stable.
(3) Cermet composite coating: Coating nano-TiC ceramic composite coating on metal surface can improve mechanical wear resistance and corrosion resistance. It has been successfully applied in static, dynamic and harsh environments to protect the substrate and improve the efficiency and service life of components.
(4) Tools: The surface of the tool is coated with nano-TiC ceramic hard film. Without losing the toughness of the metal matrix, the wear resistance of the tool surface is improved, cutting time is shortened and the surface accuracy of the workpiece is improved. A123O-TiC ceramic tools are prepared from nanoparticles with TiC content of 20%-30%, and have excellent anti-spalling properties. Powder metallurgy: nano-titanium carbide powder is used in powder metallurgy to produce ceramics and cemented carbide parts, such as wire drawing dies and cemented carbide dies.
Nano-Ti-based cemented carbides have the following characteristics:
(1) High hardness, generally up to HRA90;
(2) Good wear resistance and low wear rate;
(3) High temperature resistance and good oxidation resistance;
(4) Good thermal conductivity and chemical stability. Surfacing electrode: The hardness and wear resistance of surfacing layer can be greatly improved by adding nano-TiC into surfacing electrode. The HC value of the hardness of the welded layer can be increased from 50 to 60. In addition, the layer can be deposited and water quenching can not crack. Copolyester PETG: After adding titanium carbide (TiC) into the PETG material, the PETG material has excellent impact strength, heat resistance, good heat sealing, non-bending, scratch resistance, aging resistance, antistatic, excellent chemical resistance, low extraction resistance and hydrolysis resistance. It is a new generation of environmentally friendly plastics with good fluidity, strong dyeing power, easy moulding and good hygiene (according to fda).
Ceramic Industry:
(1) foam ceramic: Foam Ceramic crop filter can effectively remove impurities in various fluids. TiC foam ceramics have better strength, hardness, thermal conductivity, electrical conductivity and heat resistance than oxide ceramics. Therefore, it is more suitable for the preparation of high quality foam ceramics.
(2) Molten metal crucible: TiC ceramic is a kind of face-centered cubic crystal with high melting point, good thermal conductivity, high hardness, good chemical stability, no hydrolysis, high temperature oxidation resistance, so the crucible made of TiC has high temperature stability. Better, longer life. Note: This product should be stored in a cool, dry room to avoid excessive pressure. The powders without surface treatment should not be exposed to air during use to avoid moisture absorption and agglomeration, which may affect dispersion and use.
1. HASTION Introduction
Zhuzhou Hastion High-tech Materials Co., Ltd.(short for HASTION) is located in Yanling Small and Medium Enterprise Pioneer Park in Zhuzhou
City, Hunan Province, which is covering an area of 60,000 square meters and a planned factory area of 50,000 square meters. Now
HASTION have 2 different
productions lines, one is the raw material metal compound and elemental powder(TiC/Cr3C2/VC/NbC/ZrC/HfC/(W,Ti)C/(Ta,Nb)C and so on), the other one is
the titanium carbide cermet rod/insert/plate/customized shape/guide roller and so on(belong to the steel-bonded cemented carbide), until now
our products
have been sold to many countries, like the Turkey, Belgium, Australia, Japan, Korea, Vietnam, India, Pakistan, Thailand and etc.
2. HASTION Workshop
HASTION has passed the ISO9001:2008 international quality system authentication. we are well equipped with the high-level machines for production and inspection.until now HASTION has total over
600tons annual production capacity(TiC rod: 120-180tons; metal powder: 400-450tons), also our prodution scale is still increasing.
1. Package Details(Metal Powders and TiC Rod/Insert/Plate Products)
Samples: by vacuum plastic bag firstly, then Carton.
Productions: by steel drums, then packed by pallet.
2. Shipping Method
By international express(DHL,FEDEX,TNT or others) / by sea / by air
FAQ
Q1. Are you factory or trading company?
A: We are the largest manufacturer of TiC rod with 50000m2 factory in China, and the lowest competitive price for you as the mainly raw material of TiC rod(TiC powder) is produced by ourselves. Warmly welcome to visit our factory. CONTACT US NOW.
Q2. What's the MOQ?
A: (1) NO MOQ if stock available.
(2) If no stock,different products different MOQ, and final quantity can be negotiated .
so email or call me what's the products you interested in?
Q3. What is your principle for the samples?
A: FREE SAMPLES(<1kg) for you if you are willing to pay the shipping cost.
Q4. Which payment can be acceptable?
A: by T/T, L/C, Western Union, Paypal and so on.
Q5. how about your delivery time?
A: Normally it's 7-15days after receipt of deposit. Large quantity needs to be negotiated.
Audited Supplier 
){kind=link}